Health and Safety, MSDS, REACH, CAL Prop65 and RoHS Information

Wherever possible, Gadjets attempts to supply only products that conform to all government regulations, in all jurisdictions, for all health and safety requirements. However, certain customer and government (e.g. US DOD) product requirements, such as for parts that are Cadmium plated, may impact our ability to only provide such products. Please be aware that first and foremost, Gadjets provides products that are conformant to the stated part specifications. It is assumed that customers are aware of the contents of the specifications that are called out on requests for quote, purchases orders, prints and other specifications, and the implications with respect to compliance with RoHS, REACH and other regulations. For example, if a customer requests a part supplied by Gadjets should be conformant to MS28876 I/A/W MIL-5049, the customer will be aware that Table 1 materials include those that contain regulated materials such as Beryllium, Cadmium, certain Chromates and Lead and should verify that the concentrations thereof do not exceed any regulations that apply for the geographies wherein the parts are to be distributed, transported and used. Also that if certain conformance tests are required to be performed that prescribe the use for example, of Mercurous Nitrate (e.g. internal stress testing of materials), small amounts of residue may be absorbed by and remain within the structure of the tested material. We offer material certs, free of charge to all customers upon request.

European Environmental Legislation - RoHS 2011/65/EU 

The RoHS Directive is a European Environmental Legislation with the intent of limiting the amount or presence of hazardous substances in electronic devices. Six substances: Lead (pb), Mercury (Hg), Cadmium (Cd), Hexavalent Chromium (Cr6+), Polybrominated Biphenyls (PBB) and Polybrominated Diphenyl Ether (PBDE) have been identified as those who's content must be limited. 

Lead is allowed in steels up to .35% by weight 6(a) and aluminum up to .4% by weight 6(b) with copper up to 4.0% by weight 6(c).

Law: http://ec.europa.eu/environment/waste/rohs eee/events rohs3 en.htm Exemptions: http://ec.europa.eu/environment/waste/rohs eee/legis en.htm 

Registration, Evaluation, Authorization and Restriction of Chemical Substances 

(REACH) REACH is a European Community Regulation on chemicals and their safe usage. This law went into effect back in June of 2007. The general purpose of this law is to protect humans and the environment from intrinsic chemical substances. 

Copper and Brass Sales is a distributor of metallic raw materials that are produced by other manufacturers. The components of these materials (articles as defined by this legislation) do not intend or expect any of the listed components to be released as part of the design. Consequently, such products are considered exempt from the pre registration and registration under REACH. 

As a courtesy to our customers, we have included the most recent "Candidate List" for substances identified by REACH (Rev. June 15, 2015). Please go to the following link for a breakdown of the substances. 

List: http://echa.europa.eu/web/guest/candidate-list-table Please refer to the Material Test Report that accompanies all shipments to verify chemical content and compliance. If you have any questions or concerns regarding any of this information, please contact us.

Material chemistries that may exceed levels permitted by certain requirements in certain jurisdictions.

UNS C36000 Free-Cutting Brass Rods – Mechanical Properties.

Element Content (%)

Copper, Cu 60-63

Lead, Pb 2.5-3.0

Iron, Fe 0.35

Zinc, Zn Remainder

UNS C93200 Bronze – Mechanical Properties.

Element Content (%)

Cu 83

Pb 7 (above allowable level)

Sn 7

Zn 3

Cadmium Plating

Cadmium plating is not RoHS compliant. Although clause 8 of the Annex of the original RoHS Directive (2002/95/EC) granted an exemption allowing cadmium plating to be used in some aerospace applications and other safety critical applications, the current directive no longer allows any exemption for cadmium plating. Cadmium is also a REACH SVHC and cadmium plating on any metal wipers will always exceed the allowable REACH threshold of 0.1 % of article weight.